Helping a friend

Looking for recommendations? Have one to give?
Post Reply
Dave Lewis
Posts: 894
Joined: Thu Jun 21, 2007 11:57 am
WHRRI Member Number: 2165

Helping a friend

Post by Dave Lewis »

Looking for recommendations for a machine shop for small 4 cyl engine. Also need stock flywheel for 1.8 Miata and 2 intake and 2 exh valves. Valves not need to be good, just not bent.
Clock Tower Dave.
Dave Lewis
Posts: 894
Joined: Thu Jun 21, 2007 11:57 am
WHRRI Member Number: 2165

Re: Helping a friend

Post by Dave Lewis »

Need recommendations for a machine shop for small 4cyl engine in Clarkston area. Also looking for stock flywheel in good condition for 1.8 Miata. 2 intake and 2 exh valves. Same 1.8. Valves not need to be in good condition., just not bent.
Clock Tower Dave.
Bruce Race
Posts: 484
Joined: Mon Jul 21, 2008 3:37 pm

Re: Helping a friend

Post by Bruce Race »

Try Chuck's engines, in Westland...I've had work done there, Bruce
Dave Lewis
Posts: 894
Joined: Thu Jun 21, 2007 11:57 am
WHRRI Member Number: 2165

Re: Helping a friend

Post by Dave Lewis »

Thanks Bruce, glad to see life on the board. I'm familiar with Chuck's, but the engine is in Davisburg. So would like somewhere closer.
Clock Tower Dave.
Post Reply